Commercial · Sacramento, CA
Restaurant epoxy flooring has to handle grease, constant traffic, and nightly washdowns without getting slick or peeling. Elite Epoxy Sacramento has served Sacramento since 2018, installing and repairing commercial epoxy and urethane systems built for kitchens, bars, and dining rooms.
Prep makes or breaks restaurant epoxy flooring, so we start with the slab. We diamond-grind concrete with HEPA dust control, test for moisture vapor transmission, and remove old coatings, mastic, and grease contamination. Cracks and spalls get routed and filled with epoxy gel or polyurea, then we build a level base with an epoxy primer and a self-leveling epoxy mortar where needed. Transitions, drains, and thresholds are detailed so water does not sit at edges or under mats.
For back-of-house and wet areas, we match the system to the environment and the cleaning routine. Many kitchens and dish rooms perform best with a urethane cement (urethane mortar) at 3/16-1/4 inch for thermal shock resistance, then a chemical-resistant urethane topcoat. Bars and dining areas often do well with 100% solids epoxy and a high-wear polyaspartic or urethane topcoat for stain resistance. We tune traction using broadcast quartz or aluminum oxide and set slip resistance for each zone, including ramps, walk-in cooler approaches, and behind the bar.
Sacramento restaurant operators choose us because we build floors around uptime and inspection realities, not just appearance. Our crews stage work to keep egress paths open, coordinate around night shifts or closed days, and plan cure windows so you can get back to service fast. You get straightforward options, system thicknesses, and written scope, including cove base, floor-to-drain details, and repairs that stop spreading. We are licensed and insured, and we communicate clearly with owners, GMs, and facility teams.
At closeout we walk the floor with you, check adhesion, verify texture consistency, and confirm drains, door clearances, and transitions. We provide care and cleaning guidance (approved degreasers, auto-scrubber pads, and recoat intervals), plus punch-list completion dates if any touch-ups are needed. Your finished package can include crack maps, product data sheets, and a written estimate for future phase work like dining-room refreshes or new bar builds. If you need repair work, we can spot-repair failed sections, re-topcoat traffic lanes, and re-stripe safety markings without replacing the entire floor.
Yes. We provide a free written estimate after we review the slab condition, square footage, and the coating system you want.
Sometimes. If the existing coating is well-bonded, we can grind it to a sound surface and recoat; if it is failing, we recommend full removal to bare concrete for reliable adhesion.
Most systems include diamond grinding, crack and spall repair, epoxy primer and base coat, full flake broadcast (if selected), then a polyaspartic or polyurethane clear topcoat with optional anti-slip additive.
We use mechanical grinding plus targeted degreasing where needed. The goal is removing contamination, not hiding it, so the primer can bond directly to clean concrete.
Standard epoxy can amber with UV exposure. For areas with direct sunlight, we typically recommend a UV-stable polyaspartic topcoat to help maintain color and gloss.
Restaurant epoxy flooring is a practical upgrade for kitchens, bars, and dining rooms when you need a surface that cleans fast, resists staining, and stays safer under wet conditions. Elite Epoxy Sacramento installs and repairs commercial-grade epoxy, urethane cement, and protective topcoats designed for high traffic, grease exposure, and frequent hot-water washdowns. Whether you are opening a new concept or fixing peeling paint and slick tile, we build a system that fits your schedule, your health inspection requirements, and your budget.
For prep, we focus on bond strength and contamination removal, because most restaurant failures start under the coating. We mechanically profile concrete (CSP profile from grinding), test slab moisture, and correct weak or dusty concrete before we ever open epoxy. Cracks, spalls, and worn joints are repaired with epoxy or polyurea, then we prime and build thickness using 100% solids epoxy, epoxy mortar, or self-leveling underlayment depending on flatness and abuse level. If the slab needs aggressive chemical resistance or thermal shock protection near dish machines and mop sinks, we often recommend urethane cement at a thicker build.
Finish selection depends on where the floor sits in your operation. Kitchens and dish rooms usually need texture and durability more than gloss, so we use broadcast aggregate and topcoats designed for abrasion, hot-water exposure, and cleaners. Bars and dining rooms can be smoother and more decorative, with a high-wear clear coat that helps with stain cleanup and black mark resistance. We also handle repairs, including delamination removal, re-prime and re-topcoat, and spot work around drains, walk-ins, and traffic lanes so you do not have to shut down for a full replacement.
If you are comparing bids for restaurant epoxy flooring, ask for the prep method, the exact resin system, and the planned thickness in mils or inches, plus how traction will be achieved and maintained. We provide a written scope with product data, cure windows, and a cleaning plan so your staff protects the finish from day one. When you are ready, we will look at the site, measure moisture, and give you a free written estimate that fits your timeline.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Sacramento. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
