Residential · Sacramento, CA
Metallic epoxy flooring turns plain concrete into a seamless, 3D marbled surface that cleans easily and handles real foot traffic. Elite Epoxy Sacramento has served Sacramento since 2018, installing and repairing metallic systems for homes, showrooms, offices, and retail spaces.
Prep is what makes metallic epoxy look deep and stay bonded. We start with moisture checks and crack mapping, then diamond-grind the slab with HEPA dust control to remove laitance, paint, and sealers. Spalls and joints get rebuilt with epoxy mortar or polyurea joint filler, then we apply a penetrating epoxy primer and build a tinted base coat for consistent color. If needed, we add a broadcast sand layer for grip and to level minor imperfections before the metallic layer goes down.
Sacramento concrete can vary widely, so we adjust the system for heat, cure times, and slab condition. Metallic pigments are blended into 100 percent solids epoxy and poured, squeegeed, and back-rolled to create the movement pattern, then manipulated with spiked shoes, notched squeegees, and airflow control to avoid lap lines. Finish options include a clear high-wear topcoat in polyurethane or polyaspartic, with UV stability and selectable sheen (satin to gloss). For safety and code-driven areas, we can add an aluminum oxide or polymer grit additive to hit the traction level you want without turning the floor into sandpaper.
Sacramento customers choose us because metallic epoxy flooring is not a one-coat project, it is a controlled system with tight timing. Our crews focus on consistent surface profile (ICRI CSP targets), clean edges, and uniform film build so the floor looks intentional in every light. You get straight answers on what metallic can and cannot hide, where repairs will still telegraph, and how to pick colors that work with your lighting. We are licensed and insured, and every job starts with a written scope and clear cure-time expectations for your household or business.
At the end, we do a full walkthrough and light-angle inspection, then document care instructions so the finish stays sharp. You get repaired joints where specified, a smooth seamless surface, and a topcoat matched to your use case, from residential living areas to commercial sales floors. We confirm recoat windows, return-to-service timing, and the right cleaning method (pH-neutral cleaner, soft pads, no citrus degreasers). If you need a refresh later, we can screen and re-topcoat to restore gloss and protection without tearing out the whole floor.
Yes. We provide a free written estimate after we review the slab condition, square footage, and the coating system you want.
Sometimes. If the existing coating is well-bonded, we can grind it to a sound surface and recoat; if it is failing, we recommend full removal to bare concrete for reliable adhesion.
Most systems include diamond grinding, crack and spall repair, epoxy primer and base coat, full flake broadcast (if selected), then a polyaspartic or polyurethane clear topcoat with optional anti-slip additive.
We use mechanical grinding plus targeted degreasing where needed. The goal is removing contamination, not hiding it, so the primer can bond directly to clean concrete.
Standard epoxy can amber with UV exposure. For areas with direct sunlight, we typically recommend a UV-stable polyaspartic topcoat to help maintain color and gloss.
Metallic epoxy flooring is a multi-layer resin system designed to create depth, movement, and a high-end look on concrete without grout lines or tile maintenance. Elite Epoxy Sacramento installs new metallic floors and repairs failed coatings, peeling edges, hot-tire pickup, and patchy sheen by rebuilding the system from the slab up. The result is a seamless surface that is easy to clean, chemical resistant, and tailored to the room’s lighting, traffic level, and slip-resistance needs.
A good metallic epoxy floor starts with concrete evaluation, not color charts. We test for moisture vapor transmission risk, identify weak or contaminated areas, and grind to the right Concrete Surface Profile so the primer can bite. From there, we apply a pigmented base coat that sets the tone, then pour and manipulate the metallic epoxy layer to create depth. Finally, we lock it in with a clear wear coat selected for your space, often a polyurethane for abrasion resistance or a polyaspartic for fast return to service and improved UV stability.
If you already have a coated floor, we troubleshoot why it is failing before we recommend a repair. Common issues include inadequate prep, incompatible primers, moisture pressure, and thin topcoats that scratch or dull. Depending on the condition, we may spot-repair damaged areas, grind and recoat to even out gloss, or remove the old coating and rebuild the full system so the metallic effect looks continuous wall-to-wall.
For homeowners and businesses in Sacramento, metallic epoxy flooring is a practical upgrade as well as a design feature. It keeps dust down compared to bare concrete, resists stains, and cleans with simple pH-neutral soap and microfiber pads. If you want a floor that reads premium under showroom lights but still holds up to real life, ask for a written estimate and a recommended system based on how you use the space.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Sacramento. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
